BERGSTIK 5-Pin Unshrouded Header
The FCI 75160-102-05LF is a 5-position, single-row unshrouded male pin header from the BERGSTIK® series, designed for board-to-board interconnect on a standard 0.100" (2.54mm) pitch. This through-hole header carries a 5 A current rating per contact and is rated for 110 V. The mating contacts are finished with 30.0 µin (0.76µm) of gold, GXT™, over phosphor bronze, providing reliable performance across repeated mating cycles.
Key Specs and Fit
The 0.100" pitch matches legacy 0.100-inch grid layouts, common in prototyping and industrial control boards. The 5 A per-contact rating is sufficient for moderate power distribution or signal-level current; the 110 V rating is typical for low-voltage board-level circuits. The unshrouded design means the pins are exposed after mating, so board spacing and creepage distance should be verified in the final assembly. The 30.0 µin gold GXT plating on the mating surface supports a higher number of mating cycles than a tin-plated equivalent, making this header a better fit for applications where the connector is mated and unmated during test, calibration, or field service. The housing is molded from UL94 V-0 rated thermoplastic, meeting the flame retardancy requirement for equipment installed inside an enclosure. Operating temperature range of -65°C to 130°C covers automotive underhood and industrial cabinet environments. The 0.230" (5.84mm) mating pin length provides a solid engagement depth for the matching receptacle.