The Amphenol FCI 75160-102-08LF is an 8-position unshrouded male pin header from the BERGSTIK® series, on the standard 0.100" (2.54mm) pitch. It's a through-hole board-to-board interconnect — the kind you see on prototype boards, test fixtures, or any assembly where you need a reliable separable connection between two PCBs. The single-row layout keeps the board footprint narrow, and the 0.230" (5.84mm) mating pin length gives a solid wipe depth into the matching receptacle. The gold GXT™ plating on the mating surface — 30.0µin (0.76µm) thick — is the real story here: it resists corrosion and holds up to repeated mating cycles better than a tin finish would, which matters if this connector sees field service or multiple board swaps.
It mates with any standard 0.100" pitch female socket strip or IDC receptacle that accepts a 0.025" square pin. The 0.465" (11.81mm) overall contact length and 0.135" (3.43mm) solder post give a clear board stack-up: the post sits through the plated hole, the mating pin extends above the insulator for the receptacle to grab.