The Amphenol FCI BERGSTIK® 75160-107-36LF is a 36-position, single-row, unshrouded male header on a 0.100" (2.54mm) pitch — the classic breadboard-compatible grid that makes board layout straightforward for any through-hole prototype or production run. It sits in the BERGSTIK series as a full-populated, single-row pin strip with through-hole solder termination, designed for board-to-board signal interconnect where the mating receptacle provides its own polarisation or keying.
Where it fits and what to watch
For vibration-prone environments, pair it with a receptacle that has a locking ramp or board lock; the header itself relies on the through-hole solder joint for mechanical hold. The 0.100" (2.54mm) insulation height and 0.225" (5.72mm) mating pin length give a standard board-to-board stack height when mated with a matching BERGSTIK receptacle — the gap between boards is the sum of the two insulation heights plus the pin overlap, so verify the total stack against your enclosure z-height budget. The 0.600" (15.24mm) post length is a long tail for through-hole soldering — it gives plenty of protrusion through the board for wave or hand solder, but check that the board thickness and any bottom-side components leave clearance.