The Amphenol FCI 75160-150-07LF is a 7-position member of the BERGSTIK® series — a 0.100" (2.54mm) pitch unshrouded male pin header intended for board-to-board stacking applications. This single-row through-hole header carries 5 A per circuit at 110 V, with the current rating limited by the 30.0µin (0.76µm) gold GXT™ plating on the mating surface rather than the phosphor bronze contact substrate itself.
The 0.100" (2.54mm) pitch is the standard breadboard-compatible spacing — the footprint matches legacy perfboard layouts and common 0.1" grid prototypes. The 7-position count must match the BOM line exactly; this header loads all positions.
This unshrouded header mates with any standard 0.100" (2.54mm) pitch single-row receptacle housing or IDC socket that accepts 0.025" square pins — common mates include Amphenol FCI DUBOX™ or BergStik receptacle housings. Termination is through-hole solder; the 0.123" (3.12mm) post length suits standard 1.6mm PCB thickness with enough tail protrusion for wave solder.
No official second-source or direct cross-reference is documented, but the BERGSTIK® series footprint is widely imitated — verify the mating half pitch and pin count before substituting.