Product Introduction
The Amphenol ICC (FCI) BERGSTIK 75160-156-20LF is a 20-position, single-row, unshrouded male pin header on a 0.100" (2.54 mm) pitch — the classic Berg strip footprint that has been a board-to-board workhorse for decades. It terminates through-hole with solder, carries a 5 A per circuit rating at 110 V, and uses gold GXT plating on the mating surface at 30.0 µin thickness. The thermoplastic housing is rated UL94 V-0, and the operating temperature range spans -65°C to 130°C.
The 0.100" (2.54 mm) pitch is the standard breadboard-compatible spacing — it matches legacy perfboard, prototyping grids, and the vast installed base of 0.100" receptacles. At 20 positions in a single row, the header occupies about 2 inches of board edge, leaving room for routing between pins on a 2-layer board. The 5 A per circuit rating is typical for signal-level interconnects and light power distribution; if your load pulls more than 3 A per pin continuously, check the temperature rise against the UL94 V-0 housing limit.