The Amphenol FCI 75160-196-03LF is a 3-position single-row unshrouded male header from the BERGSTIK® series, on the standard 0.100" (2.54 mm) pitch. It is a through-hole board-to-board interconnect with push-pull fastening, designed for signal-level and low-current distribution where a simple, reliable pin header is needed. The 0.230" (5.84 mm) mating pin length gives a solid engagement depth with the matching receptacle. Rated 5 A per contact at 110 V, this header carries enough current for typical signal and low-power board interconnects — the 0.100" pitch and unshrouded design keep the footprint compact and compatible with standard perfboard layouts. The gold GXT™ plating at 30.0 µin (0.76 µm) on the mating surface supports repeated mating cycles without contact fretting, making it suitable for field-service or test applications where connectors are cycled more than once. The operating temperature range of -65°C to 130°C and UL94 V-0 thermoplastic insulation suit industrial and outdoor environments where the connector sees thermal cycling. The phosphor bronze contacts provide good spring retention over the full temperature span.
This unshrouded header mates with any standard 0.100" (2.54 mm) pitch single-row female receptacle or IDC socket that accepts 0.025" square pins — common choices include the BERGSTIK II or Dubox series receptacles.