Skip to main content
Log in
75160-301-10LF — Amphenol product photo
Amphenol

Amphenol FCI 75160-301-10LF BERGSTIK Header, 10 Pos, 2.54 mm

MPN75160-301-10LF
Active

Amphenol FCI BERGSTIK series, 75160-301-10LF unshrouded header, 10 positions, 0.100" (2.54 mm) pitch, 1 row, 5 A, tin-plated phosphor bronze contacts, through-hole solder termination, UL94 V-0.

$2.0300Ref. price · indicative, final on quote
75160-301-10LF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

75160-301-10LF Technical Specifications
ParameterValue
SeriesBERGSTIK®
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Operating temperature-65°C ~ 130°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions10
Contact length - post0.100\" (2.54mm)
Overall contact length0.425\" (10.80mm)
Contact finish - matingTin
Contact length - mating0.225\" (5.72mm)
Contact finish thickness - mating78.7µin (2.00µm)

Product details

It uses the standard 0.100" (2.54 mm) pitch — the same grid as breadboards and perfboards — so the footprint lines up with common prototyping layouts. Rated 5 A per circuit at 110 V, with tin-plated phosphor bronze contacts (78.7 µin of tin on the mating surface). The through-hole solder tails are 0.100" (2.54 mm) long, and the overall contact length is 0.425" (10.80 mm). Operating temperature range is -65°C to 130°C, and the thermoplastic housing carries a UL94 V-0 flammability rating.

Tin is fine for a one-time board assembly or occasional rework; if you need frequent connect/disconnect, you'd want a gold-plated sibling. The 10 positions are fully loaded — no empty spots to track.

Frequently asked questions

What is the pin pitch of the 75160-301-10LF?

The pin pitch is 0.100" (2.54 mm), which is the standard grid compatible with breadboards and perfboards.

What is the current rating of the 75160-301-10LF?

The 75160-301-10LF is rated 5 A per circuit, which covers signal-level current and light power duty.

What is the difference between 75160-301-10LF and 75160-301-10?

The -10LF suffix indicates RoHS compliance. The 75160-301-10 (without LF) is the same header functionally but was produced before the RoHS transition. The -10LF is the current active version.