BERGSTIK 75160-302-08LF — 8-Position Unshrouded Header
The Amphenol FCI BERGSTIK 75160-302-08LF is an 8-position, single-row unshrouded header on the standard 0.100" (2.54 mm) pitch. It is a through-hole, male-pin header with tin-plated phosphor bronze contacts rated 5 A per circuit at 110 V. The unshrouded design leaves the square pins exposed for mating with a shrouded receptacle housing or for direct board-to-board connection. The black thermoplastic housing carries a UL94 V-0 flammability rating, and the operating range spans -65°C to 130°C.
What the Ratings Mean for Your Board Fit
The 0.100" (2.54 mm) pitch matches the standard breadboard and prototyping grid — it also sets the board footprint for the through-hole solder tails. The 8 positions are fully loaded, so the BOM position count is a direct match. The 5 A per-circuit rating is typical for signal-level interconnects; this is not a power-bus header. The tin plating on the mating surface (78.7 µin thick) is a cost-effective finish for low-cycle, low-vibration applications — it is not intended for frequent reconnection or corrosive environments. The unshrouded design means the pins are exposed after mating; pair this header with a matching shrouded receptacle if the assembly needs polarization or pin protection.