Skip to main content
Log in
75160-818-36LF
Amphenol

75160-818-36LF BergStik Header, 36 Pos, 0.100" Pitch, 5A

MPN75160-818-36LF
Active

Amphenol ICC BERGSTIK® header, 36 positions, 1 row, 0.100" (2.54mm) pitch, unshrouded, through-hole, solder termination, gold GXT plating, 5A, 110V, UL94 V-0.

$4.7670Ref. price · indicative, final on quote
75160-818-36LF datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

75160-818-36LF Technical Specifications
ParameterValue
SeriesBERGSTIK®
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Operating temperature-65°C~130°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions36
Contact length - post0.120\" (3.05mm)
Overall contact length0.445\" (11.30mm)
Contact finish - matingGold, GXT™
Contact length - mating0.225\" (5.72mm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

It uses the standard 0.100" (2.54mm) pitch, making it compatible with breadboard-style layouts and a wide range of mating receptacles. Rated at 5A per contact with a 110V voltage rating, this is a signal-to-light-power interconnect, not a bus bar — the 5A figure is per circuit at the rated temperature rise. The contact finish is gold GXT™ at 15.0µin (0.38µm) on the mating surface, giving good corrosion resistance and supporting repeated mating cycles for field-service or test-point duty.

Mating and fit

The 0.225" (5.72mm) mating pin length provides a solid wipe inside the receptacle contact. The overall contact length is 0.445" (11.30mm), with a 0.120" (3.05mm) solder post for through-hole PCB mounting.

Board layout considerations

The 0.100" (2.54mm) pitch and single-row layout keep the PCB footprint compact — a 36-position header occupies about 3.6 inches of board edge. The through-hole solder posts are 0.120" (3.05mm) long, suitable for standard 0.062" to 0.093" thick PCBs.

Frequently asked questions

What is the pitch of the 75160-818-36LF?

The pitch is 0.100" (2.54mm), the standard breadboard-compatible spacing used across the BergStik series.

What is the current rating of the 75160-818-36LF?

The current rating is 5A per contact. This is a signal-to-light-power rating — adequate for power distribution within a board but not for bus-bar-level current.

What mates with the 75160-818-36LF?

This unshrouded header mates with any standard 0.100" pitch single-row receptacle housing, including BergStik female socket housings and industry-standard IDC ribbon cable connectors.