Skip to main content
Amphenol 75160-826-04LF — Pin Headers, Sockets & Housings

75160-826-04LF BERGSTIK Header, 4 Pos, 0.100" Pitch, 5A

MPN75160-826-04LF
Active

Amphenol BERGSTIK® header, 75160-826-04LF, unshrouded, 4 circuits, 1 row, 0.100" (2.54mm) pitch, through-hole solder, male pin, gold GXT™ plating, rated 5A at 110V.

$0.7744Ref. price · indicative, final on quote
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

75160-826-04LF key specifications
ParameterValue
SeriesBERGSTIK®
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Operating temperature-65°C~130°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Insulation materialThermoplastic

All specifications

75160-826-04LF additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions4
Contact length - post0.112\" (2.84mm)
Overall contact length0.825\" (20.95mm)
Contact finish - matingGold, GXT™
Contact length - mating0.613\" (15.57mm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

Board-to-Board Header for Standard 0.100" Grids

The Amphenol 75160-826-04LF is a 4-position, single-row, unshrouded male pin header from the BERGSTIK® series. It is a board-to-board interconnect, designed to mate with a matching female socket on a 0.100" (2.54 mm) pitch grid. The unshrouded design means there is no plastic wall around the pins, so the mating orientation is defined entirely by the PCB footprint — a common choice for low-profile, general-purpose board stacking or wire-to-board applications where a separate housing is used. Rated at 5 A per contact with a 110 V voltage rating, this header carries enough current for typical signal and moderate-power duties on a standard 0.100" pitch. The 15.0 µin gold GXT™ plating on the mating surface provides a corrosion-resistant, low-contact-resistance interface suited for repeated mating cycles in controlled environments.

Through-Hole Termination and Board Fit

Termination is through-hole solder, with a post length of 0.112" (2.84 mm) below the insulator. The overall contact length is 0.825" (20.95 mm), with a mating pin length of 0.613" (15.57 mm). This gives enough pin exposure to mate with standard box headers or crimp-socket housings while leaving a solid post for soldering into a plated through-hole. The insulation height of 0.100" (2.54 mm) keeps the header low on the board. The header is unshrouded and uses a push-pull fastening type, meaning retention relies on the friction of the mating contact, not a latch. For applications where vibration is a concern, a mating connector with a positive lock or a secondary retention feature should be considered.

Material and Environmental Ratings

The housing is molded from thermoplastic with a UL94 V-0 flammability rating, suitable for equipment inside an enclosure where flame retardance is required. The operating temperature range of -65°C to 130°C covers most industrial and commercial environments. The contacts are phosphor bronze with a gold GXT™ mating finish, a standard combination for reliable signal-level interconnects.

Frequently asked questions

What is the compatible mating connector for 75160-826-04LF?

This unshrouded header mates with any standard 0.100" (2.54 mm) pitch female socket or crimp housing that accepts a 0.025" square pin. The mating half is not a single order code but a class of connectors — typically a BERGSTIK or equivalent receptacle housing with the same pitch and position count.