It sits on the standard 0.100" (2.54 mm) pitch — the same grid as perfboard and legacy DIP sockets — so the board footprint is a straight row of drilled holes at 2.54 mm centers.
Footprint and termination
Through-hole solder termination gives a stronger mechanical anchor than an SMT header — the 0.133" (3.38 mm) post length clears a standard 1.6 mm PCB with room for a solder fillet. The overall contact length of 1.225" (31.12 mm) means the mating pin stands 0.993" (25.21 mm) above the board before the insulation sits at 0.100" (2.54 mm). That's a tall pin — the board layout engineer should verify the mating receptacle's stack height fits within the enclosure's z-budget.