12-Position Single-Row Receptacle at 0.100" Pitch
The 75915-412LF: Through-hole termination with a 0.114" (2.90 mm) solder post length — the footprint matches standard 0.100" grid board layouts, and the single row keeps the board-edge keep-out narrow. Push-pull fastening (no latch) means this receptacle is best suited for low-vibration board-to-board stacking where the mated pair is not subject to continuous shock.
Board Fit and Stack Height Considerations
With a 0.335" (8.51 mm) insulation height and 0.114" (2.90 mm) post length, the seated height above the PCB is set by the mating header's post length. For a typical 0.100" pitch board-to-board stack, this receptacle mates with a matching Dubox™ pin header — the combined stack height lands near 0.500" depending on the header's post. Confirm the header's mating post length against your board-to-board gap budget. The single-row 12-position layout fits a board footprint matching the 0.100" pitch grid.
RoHS compliant.