Skip to main content
Log in
77311-871-15 — Amphenol product photo
Amphenol

77311-871-15 BergStik Header – 15-Pin, 0.100" Pitch

MPN77311-871-15
Obsolete

Amphenol ICC (FCI) BergStik 77311-871-15, unshrouded 15-position single-row header, 0.100" (2.54 mm) pitch, through-hole push-pull male pin, phosphor bronze, gold or gold GXT mating finish / tin-lead post, 150.0 µin post plating, UL94 V-0 thermoplastic housing.

$1.1703Ref. price · indicative, final on quote
77311-871-15 datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

77311-871-15 Technical Specifications
ParameterValue
SeriesBERGSTIK®
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions15
Contact finish - postTin-Lead
Contact finish - matingGold or Gold, GXT™
Contact finish thickness - post150.0µin (3.81µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

15-Pin Unshrouded Header – BergStik Series

The 77311-871-15: The push-pull fastening and lack of a shroud mean the mating receptacle relies on friction retention — no secondary latch. This is a standard board-to-board signal interconnect, not a vibration-resistant or sealed design. The post finish is tin-lead at 150.0 µinch, which is a legacy solder finish; this part is not RoHS-compliant for the post side.

No stock-holding claim; sourced per BOM line.

The 0.100" pitch and 15 positions set the PCB footprint — a single row of through-hole solder tails. Confirm the mating half's keying and polarization separately; this header has no shroud to prevent mis-mating.

Frequently asked questions

What is the replacement for 77311-871-15?

A functionally equivalent BergStik header would need the same 15 positions, 0.100" pitch, and unshrouded single-row configuration — but the plating and RoHS status may differ. Confirm the BOM requirements before substituting.

Where can I buy 77311-871-15?

We source this obsolete part through independent distribution. No stock-holding claim is made.