The 77313-124-46: The breakaway design means the 46 positions are all loaded, but the strip can be snapped to shorter lengths if needed — though this part ships as a fixed 46-position unit. The through-hole solder termination suits wave or hand soldering on a standard PCB.
Obsolete — Sourcing and Replacement Options
For a direct replacement, consider other BergStik headers with the same 0.100" pitch, 46 positions, dual-row, unshrouded configuration — but verify the contact finish and post length match your application. A board spin may be required if no exact match is found.
Mates with BergStik receptacle housings or IDC sockets that accept a 0.100" pitch, dual-row, 46-position unshrouded pin header. Termination is through-hole solder. The post length is 0.114" (2.90 mm) — check your PCB thickness and solder joint clearance. Overall contact length is 0.480" (12.19 mm), with a mating pin length of 0.266" (6.75 mm) for receptacle engagement. Insulation height is 0.100" (2.54 mm) — the header sits low on the board.