26-Position BERGSTIK® Header — 0.100" Pitch, 3 A, Gold
This is an unshrouded header — there is no plastic shroud around the pins. The 0.260" pin length mates with standard BERGSTIK® receptacles; the 0.105" post fits through a 0.040" to 0.045" plated through-hole on a typical 0.062" PCB. All 26 positions are loaded — no breakaway gaps. The dual-row layout with 0.100" row spacing gives a 0.200" overall width across the two rows, fitting standard 0.100" grid prototyping boards.
RoHS compliant per the manufacturer.
Peer Comparison — 26-Position Variants
The 77313-118-26LF is the same 26-position, 0.100" pitch, gold-plated header but with a shorter overall contact length of 0.450" (11.43 mm) versus 0.465" (11.81 mm) on the -127. The difference is in the mating pin length: the -118 uses a 0.230" pin, while the -127 uses 0.260". If your mating receptacle has a deep cavity, the longer pin ensures full engagement.