Board Fit and Pin Layout
The 77313-818-06: Unshrouded push-pull header means the pins are exposed; there is no keying shroud to prevent mis-mating, so the board layout must ensure the mating half is correctly oriented before insertion. Through-hole solder tails 0.120" (3.05mm) long — the board hole depth and solder fillet need to clear the post length for a reliable through-hole joint.
Marked obsolete by Amphenol ICC — no official successor or replacement part number is recorded for this exact 6-position variant. No stock-holding claim — sourced per order.
Post finish is tin-lead at 150.0 µinch (3.81µm) — the thicker solderable finish on the tail ensures a reliable through-hole solder joint.
Mates with any Bergstik receptacle or IDC socket that accepts a 0.100" pitch, 2-row, 6-position unshrouded header — the push-pull retention means no locking latch, so the pair relies on the housing friction fit.