Skip to main content
Log in
77315-101-08LF — Amphenol product photo
Amphenol

77315-101-08LF Amphenol ICC BERGSTIK Header 8-Pos 2.54mm

MPN77315-101-08LF
Active

Amphenol ICC (FCI) BERGSTIK® header, order code 77315-101-08LF, 8 positions, single row, 0.100" (2.54mm) pitch, 3A per contact, gold or GXT™ mating finish, through-hole right-angle, solder termination.

$0.9371Ref. price · indicative, final on quote
77315-101-08LF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

77315-101-08LF Technical Specifications
ParameterValue
SeriesBERGSTIK®
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader, Breakaway
Fastening typePush-Pull
Current rating3A per Contact
Operating temperature-65°C~125°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.094\" (2.40mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions8
Contact finish - postTin
Contact length - post0.101\" (2.57mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.225\" (5.72mm)
Contact finish thickness - post78.7µin (2.00µm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

Contact system and mating finish

The 77315-101-08LF is the 8-position member of Amphenol ICC's BERGSTIK® breakaway header line, a single-row unshrouded board-to-board connector.

Board fit and unshrouded layout

Unshrouded push-pull fastening with a 0.094" (2.40mm) insulation height leaves the mating pins exposed for direct board-to-board stacking or wire-to-board receptacles. The through-hole right-angle orientation places the 0.101" (2.57mm) solder tails parallel to the PCB, suiting edge-mount or low-profile layouts where vertical clearance is limited.