Skip to main content
Log in
78207-218HLF
Amphenol

78207-218HLF Amphenol ICC (FCI) 18-Pin Right-Angle Header

MPN78207-218HLF
Active

Amphenol ICC (FCI) Mini-PV™, Basics+ series, 78207-218HLF, 18-position dual-row header, 0.100" (2.54 mm) pitch, through-hole right-angle, shrouded - 2 wall, friction lock, male pin, square contact, 15.0 µinch gold or GXT™ plating, black UL94 V-0 housing, bulk.

$3.0100Ref. price · indicative, final on quote
78207-218HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

78207-218HLF Technical Specifications
ParameterValue
SeriesMini-PV™, Basics+
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeFriction Lock
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.303\" (7.70mm)
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesKeying Slot
ShroudingShrouded - 2 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions18
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.120\" (3.05mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

18-Position Right-Angle Header for Board-to-Cable Harnesses

The 78207-218HLF is an 18-position, dual-row header from the Mini-PV™ and Basics+ series by Amphenol ICC (FCI).

Friction Lock and Gold Plating for Vibration and Cycle Life

The friction lock fastening type provides a positive retention force when mated with a compatible receptacle housing, resisting vibration-induced disconnect in harness applications. This is a simpler, lower-profile alternative to a full locking latch, suitable for environments where the connector is not subject to heavy cable pull.

Frequently asked questions

What is the mating connector for the 78207-218HLF?

The friction lock requires a matching housing with the corresponding locking ramp. Confirm the circuit count and keying slot alignment with the receptacle part number.

Can the 78207-218HLF be used in high-vibration applications?

The friction lock provides vibration resistance better than an unlatched header, but it is not a secondary lock. For sustained high-vibration environments (e.g., automotive engine bay), a connector with a positive locking latch or TPA is recommended. The gold plating supports repeated reconnects if the application requires periodic disconnection.