It uses a 0.100" (2.54mm) pitch — the standard footprint for legacy through-hole layouts — and terminates via solder to the PCB. The mating half is any matching 0.100" pitch female socket header or receptacle housing. The 30.0µin gold plating on the mating surface supports repeated mating cycles in corrosive or low-level signal environments, while the phosphor bronze contact material provides reliable spring retention over the -65°C to 125°C operating range. The UL94 V-0 liquid crystal polymer (LCP) housing handles reflow and wave-solder profiles without distortion, and the 0.100" (2.54mm) insulation height keeps the profile low for tight board stacking.
Lifecycle & Sourcing
Mating & Termination
The 0.318" (8.08mm) mating pin length provides adequate wipe for reliable contact. The 0.120" (3.05mm) solder post length suits standard through-hole PCB thicknesses.