Skip to main content
Log in
79425-144HLF — Amphenol product photo
Amphenol

Amphenol BERGSTIK II 79425-144HLF Header, 44 Pos

MPN79425-144HLF
Active

Amphenol BERGSTIK® II, Header, Board to Board, 44 Positions, 0.100" (2.54mm) Pitch, 2 Row, Through Hole, Solder, 5A, 110V, Gold or Gold GXT™ Mating Finish.

$4.9526Ref. price · indicative, final on quote
79425-144HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

79425-144HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions44
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.120\" (3.05mm)
Overall contact length0.410\" (10.41mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.190\" (4.83mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The Amphenol BERGSTIK® II 79425-144HLF is a 44-position, dual-row unshrouded male pin header on the standard 0.100" (2.54mm) pitch grid.

Footprint and Board Fit

The 0.100" pitch and 0.100" row spacing place every pin on a 2.54mm grid — the same footprint as legacy 0.100" square-post headers used across industrial and computing backplanes. The 0.120" (3.05mm) solder tail suits boards around 1.6mm thick; for thicker boards the post length may need a design check against the plated-through-hole depth.

No official cross-reference or direct substitute is listed; the BERGSTIK® II series includes other position counts on the same 0.100" pitch, but a pin-compatible drop-in would need the same 44-position, dual-row, unshrouded, through-hole configuration with matching 0.100" row spacing.

Frequently asked questions

Where can I buy the 79425-144HLF?

Contact the storefront with your target BOM quantity for current pricing and availability — confirmed at quote time.

Is the 79425-144HLF shrouded?

No, the 79425-144HLF is an unshrouded header. The mating half must provide its own alignment; there is no polarization keying or protective shroud around the pins.