It uses a standard 0.100" (2.54mm) pitch in a dual-row configuration with all positions loaded, making it a direct fit for breadboard-compatible layouts and common 0.100" pitch receptacles.
Rated 5A per contact at 110V, the current capacity is typical for a 0.100" pitch unshrouded header — adequate for signal-level interconnects and moderate power distribution within a board stack. The 15.0µin (0.38µm) gold or GXT™ plating on the mating surface supports repeated mating cycles without contact fretting, which matters when the header sees periodic reconnection during field service or rework.
Mating and board-fit details
As an unshrouded header, the 0.100" (2.54mm) pitch square pins are exposed — the mating receptacle must provide its own polarization and pin protection. The overall contact length of 0.410" (10.41mm) breaks down into a 0.190" (4.83mm) mating length and a 0.120" (3.05mm) solder post, giving a standard through-hole standoff height of 0.100" (2.54mm) above the board surface. The dual-row layout with 0.100" (2.54mm) row spacing creates a compact 2x3 grid footprint.