It uses a 0.100" (2.54 mm) pitch on both rows and contacts, which matches standard perfboard and legacy 0.100" grid layouts — no custom footprint needed for prototyping or low-volume production. Rated 5 A per circuit at 110 V, this header handles signal duty comfortably and can carry moderate power within a board stack — the 5 A per contact is typical for the BergStik platform and is limited by the temperature rise of the UL94 V-0 housing material.
The through-hole solder tails are 0.200" (5.08 mm) long, and the overall contact length is 0.730" (18.54 mm), which sets the mated stack height when paired with a standard receptacle. The 46 positions are fully loaded across two rows at a 0.100" (2.54 mm) row spacing.