Skip to main content
Log in
79821-406HLF — Amphenol product photo
Amphenol

Amphenol BERGSTIK II 79821-406HLF, 6-pos 2.54mm Header

MPN79821-406HLF
Active

Amphenol FCI BERGSTIK II, Header, 6 Positions, 0.100" (2.54mm) Pitch, 2 Rows, Through Hole, Solder, Tin Contacts, 5A, 110V, Unshrouded, UL94 V-0.

$1.3900Ref. price · indicative, final on quote
79821-406HLF datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

79821-406HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions6
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.200\" (5.08mm)
Overall contact length0.730\" (18.54mm)
Contact finish - matingTin
Contact length - mating0.430\" (10.92mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

The Amphenol FCI BERGSTIK II 79821-406HLF is a 6-position, dual-row, unshrouded board-to-board header on the standard 0.100" (2.54 mm) pitch. It uses tin-plated phosphor bronze square pins, through-hole solder termination, and a push-pull fastening interface. This is a basic, no-frills pin header — the kind you grab when you need a reliable signal interconnect on a breadboard-compatible grid, not a shrouded or keyed connector for high-vibration environments.

The 0.100" (2.54 mm) pitch and 0.100" row spacing are the classic DIP/IC footprint — this header drops into standard perfboard or a 0.100"-grid PCB layout without a custom footprint.

Frequently asked questions

What is the pitch of 79821-406HLF?

The pitch is 0.100" (2.54 mm) on both the pin spacing and the row spacing — standard breadboard-compatible grid.

Is 79821-406HLF shrouded?

No, it is an unshrouded header — no plastic shroud around the pins. It relies on the mating housing for polarization and keying.