Amphenol ICC BERGSTIK® unshrouded breakaway header, 72 positions, 2 rows, 0.100" (2.54 mm) pitch, tin-plated male pins, through-hole solder termination, rated 3 A at 500 V.
| Parameter | Value |
|---|---|
| Series | BERGSTIK® |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Voltage rating | 500V |
| Current rating | 3A |
| Operating temperature | -40°C~100°C |
| Contact material | Copper Alloy |
| Insulation height | 0.102\" (2.60mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 72 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.118\" (3.00mm) |
| Overall contact length | 0.496\" (12.60mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.276\" (7.00mm) |
The tin-plated mating surface suits moderate-cycle applications (50–100 mates) in clean, indoor environments — think signal-level interconnects on a backplane or between two PCBs where the connector is assembled once and rarely disconnected.
A shrouded header would add keying; here the board layout and the receptacle's own housing take that role.
Supplied in bulk packaging. The tin-plated finish and 72-position count are fixed — this is not a selective-load variant; all 72 positions are loaded.
Unshrouded — the male pins are exposed after mating. The mating receptacle must provide its own alignment and polarization.