It uses the industry-standard 0.100" (2.54 mm) pitch and row spacing, making it a direct footprint match for any standard 0.100" grid board layout. The contacts are square pins with 30.0 µ" (0.76 µm) gold plating on the mating surface — a plating grade that supports repeated mating cycles in corrosive or field-service environments without sacrificing contact resistance.
Rated at 5 A per contact at 110 V, the current capacity is typical for a 0.100" pitch header and is suited for signal and moderate power distribution on the board.
The through-hole termination (0.120" post length) gives a robust solder joint for manual or wave-solder assembly, and the 0.470" overall contact length provides enough stand-off for most standard PCB thicknesses.