It uses the standard 0.100" (2.54mm) pitch on both rows and between rows, which matches legacy through-hole footprints common in backplane and mezzanine card designs. The 5A per-contact current rating is typical for this pin size and pitch; the 30.0µin gold plating on the mating surface supports repeated mating cycles and provides corrosion resistance in environments where the connector is field-serviced.
Key Specifications and Fit
The 0.100" (2.54mm) pitch is the primary footprint parameter — it dictates the board layout for the through-hole solder tails, which are 0.120" (3.05mm) long. The overall contact length of 0.470" (11.94mm) and a mating length of 0.250" (6.35mm) define the mated stack height with the corresponding receptacle.