The Amphenol 86832-106HLF is a 6-position, dual-row unshrouded header from the BERGSTIK® II series, built for board-to-board interconnect on a standard 0.100" (2.54 mm) pitch. Each square male pin is rated 5 A at 110 V, with 30.0 µ" (0.76 µm) gold or GXT™ plating on the mating surface — enough plating thickness for repeated mating cycles in field-serviceable assemblies. The through-hole solder tails measure 0.100" (2.54 mm) long, and the overall contact length is 0.525" (13.34 mm), giving a mated stack height typical for parallel-board spacing. The black UL94 V-0 rated housing and phosphor bronze contacts suit general-purpose industrial and commercial PCB layouts where a low-cost, non-keyed header is acceptable.
What the key ratings mean for your board
The 0.100" pitch matches the legacy 2.54 mm grid — the footprint is a standard 2x3 layout with 0.100" row spacing. The 5 A per-contact rating is typical for signal-level current; if your circuit draws more than 5 A per pin, you need a power-series header. The 30 µ" gold on the mating side handles moderate insertion cycles without exposing the base metal — good for boards that get reworked or swapped in the field. Because the header is unshrouded, there is no polarisation key: the mating receptacle must be aligned by the board layout or by visual registration, which is common in low-cost, high-volume designs.