Skip to main content
Log in
86832-120HLF — Amphenol product photo
Amphenol

Amphenol FCI 86832-120HLF BERGSTIK II Header, 20-pos, 2.54mm

MPN86832-120HLF
Active

Amphenol FCI BERGSTIK II 86832-120HLF, 20-position dual-row male pin header, 0.100" (2.54 mm) pitch, through-hole solder, unshrouded push-pull, gold/GXT 30.0µin contacts, 5 A, 110 V, UL94 V-0.

$2.3700Ref. price · indicative, final on quote
86832-120HLF datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

86832-120HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions20
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.100\" (2.54mm)
Overall contact length0.525\" (13.34mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.325\" (8.26mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

It is an unshrouded, push-pull header on a 0.100" (2.54 mm) pitch — the standard grid for breadboard and legacy PCB layouts. Rated 5 A per circuit at 110 V, with a 30.0 µinch gold or GXT contact finish on the mating surface, it is built for board-to-board stacking applications where signal-level current and repeated mating cycles are the norm. The through-hole solder termination and UL94 V-0 black housing suit it for general-purpose PCB interconnect inside enclosed equipment.

The 0.100" (2.54 mm) pitch matches the standard perfboard and breadboard grid.

Frequently asked questions

What is the pin pitch of 86832-120HLF?

The pitch is 0.100" (2.54 mm) on both the pin-to-pin spacing and the row-to-row spacing, matching the standard 0.100-inch grid.

Is 86832-120HLF a shrouded header?

No, it is an unshrouded header with a push-pull fastening type — no plastic shroud around the pins, so the mating receptacle must provide alignment and polarisation.