Board-to-Board Header for Through-Hole Layouts
The Amphenol 86832-136HLF is a 36-position, dual-row unshrouded header from the BERGSTIK® II series, built on the standard 0.100" (2.54mm) pitch grid. It mates with matching BERGSTIK II receptacle housings for board-to-board or wire-to-board applications, and the through-hole solder termination suits wave-solder assembly. The 5A per-contact rating is typical for signal-level loads on this pitch — the real selection driver is the 30.0µin (0.76µm) gold or GXT™ plating on the mating surface, which gives this pin a solid mating-cycle life for field-service or repeated disconnect duty, not just a one-time consumer fit.
The 0.100" (2.54mm) pitch and 0.100" (2.54mm) row spacing put this on a standard through-hole grid — board layout is straightforward, but the 36 positions in 2 rows span roughly 1.8 inches of board edge, so confirm clearance to adjacent components. The overall contact length of 0.525" (13.34mm) with a 0.325" (8.26mm) mating section and 0.100" (2.54mm) post length is a common profile for standard board thicknesses — check the post length against your PCB thickness and solder fillet height.