Product Introduction
It uses a 0.100" (2.54mm) square-pin grid on both pitch and row spacing, making it footprint-compatible with standard 0.100" IDC receptacles and legacy through-hole layouts.
The 0.525" (13.34mm) overall contact length provides a 0.325" (8.26mm) mating interface for reliable contact wipe. UL94 V-0 rated black insulation. All 58 positions are loaded.
Typical board-to-board stacking or wire-to-board via a mating IDC receptacle. The UL94 V-0 housing meets flame-retardant requirements for enclosed equipment.
5A per contact at 110V is the rated maximum for a single circuit under standard conditions; derate above ambient temperature per the manufacturer's curve. The 0.100" (2.54mm) pitch gives enough creepage for 110V without forcing an oversized board footprint. For a permanent solder joint, the tin post is standard.