The Amphenol FCI 86832-414HLF is a 14-position dual-row male header from the BERGSTIK II series, built for board-to-board interconnects on a 0.100" (2.54 mm) pitch. The 5 A per-contact rating and 110 V voltage rating suit it for general-purpose signal and moderate-power distribution on a PCB.
The 0.100" (2.54 mm) pitch is the standard breadboard-compatible spacing — the footprint matches a wide range of prototyping boards and production PCB layouts. The 14 positions are loaded fully across two rows, so the board footprint is a 2x7 grid with 0.100" row spacing. The through-hole solder termination with a 0.100" (2.54 mm) post length gives a solid mechanical anchor for hand-soldered or wave-soldered assemblies. Tin plating on the mating contacts (100.0 µin / 2.54 µm thick) is a workhorse finish for moderate mating-cycle applications — think a few dozen insertions over the life of the assembly, not a high-cycle production harness. The UL94 V-0 rated black housing (0.100" insulation height) keeps the header within flammability requirements for equipment inside an enclosure.
Where it sits in the BERGSTIK II series
BERGSTIK II is Amphenol FCI's broad line of unshrouded pin headers. The 86832 base number covers dual-row, through-hole versions. The 14-position variant (86832-414HLF) sits between the 12-position and 16-position siblings at the same 0.100" pitch — choose the position count to match your circuit count exactly; there's no need to leave unloaded positions.