60-Position Unshrouded Header in the BERGSTIK II Series
The Amphenol FCI 86832-460HLF is a 60-position unshrouded male pin header from the BERGSTIK II series, arranged in two rows on a standard 0.100" (2.54 mm) pitch. This is a through-hole board-to-board interconnect with push-pull fastening — no locking latch, so it relies on the friction of the mating receptacle for retention. The housing is rated UL94 V-0, and the contacts are phosphor bronze with tin plating on both the mating surface and the solder posts.
What the Ratings Mean for Your Fit
The 0.100" pitch and 0.100" row spacing are the industry-standard footprint for a 2-row box header — the board layout matches the legacy BergStik pattern. At 5 A per circuit, this header handles signal-level current; the tin plating on the mating interface (100.0 µin thick) is adequate for a moderate number of mating cycles but will wear faster than gold under repeated disconnect-reconnect duty. The 110 V rating is typical for this class of unshrouded header — fine for logic-level and low-voltage power distribution inside an enclosure. The unshrouded design means the pins are exposed after mating, so this header suits internal board-to-board connections where the mated pair is not subject to physical contact or shorting hazards.