The Amphenol BERGSTIK II 86832-468HLF is a 68-position, dual-row, unshrouded male pin header on a standard 0.100" (2.54mm) pitch grid. The tin-plated phosphor bronze contacts carry a 5A per-circuit rating at 110V, with a 100.0µin (2.54µm) tin mating finish that suits moderate mating-cycle applications in controlled environments.
The 0.100" pitch and 0.100" row spacing place this header on a standard square grid — the board footprint is a straightforward 2×34 through-hole pattern with 0.100" between centres. The 0.525" (13.34mm) overall contact length breaks down as 0.325" (8.26mm) mating length and 0.100" (2.54mm) post length, which sets the board-to-board stack height when mated with a matching receptacle. The 5A per-circuit rating is typical for a 0.100" pitch header with tin-plated contacts — the current is limited by the contact cross-section and the temperature rise of the UL94 V-0 rated housing material. For signal-level loads (logic, low-power sensors) the 5A headroom is generous; for power distribution, derate above ambient and consider the total current across all 68 circuits.