Skip to main content
Log in
86837-118HLF — Amphenol product photo
Amphenol

FCI 86837-118HLF BergStik II Header, 18 Pos, 0.100" Pitch

MPN86837-118HLF
Active

FCI BergStik II, 18 Position, 2 Row, 0.100" (2.54mm) Pitch, Unshrouded Header, Through Hole, Solder Termination, Gold 30.0µin Mating Contact Finish, 5A, 110V, UL94 V-0.

$0.9688Ref. price · indicative, final on quote
86837-118HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

86837-118HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions18
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.120\" (3.05mm)
Overall contact length0.600\" (15.24mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.380\" (9.65mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The FCI 86837-118HLF is an 18-position, dual-row unshrouded header in the BergStik II series, on the standard 0.100" (2.54mm) pitch. The 0.100" pitch and 0.100" row spacing put it on the legacy grid that matches most prototyping boards and ribbon cable transitions.

The 18 positions are fully loaded across two rows — 9 per row — at the same 0.100" pitch and row spacing as the rest of the BergStik II family. The unshrouded design means the pins are exposed; it mates with any standard 0.100" IDC socket or a shrouded header receptacle that accepts 0.025" square pins. The overall contact length is 0.600" (15.24mm), with a mating length of 0.380" (9.65mm) and a post length of 0.120" (3.05mm) — that post length determines how much board thickness it can clear on the solder side.

Frequently asked questions

What is the pitch of the 86837-118HLF?

The mating pitch is 0.100" (2.54mm) with the same 0.100" row spacing — standard legacy grid, compatible with most 0.100" IDC and shrouded receptacles.

What is the pinout and mating connector for 86837-118HLF?

This is an unshrouded male pin header with 18 positions in 2 rows. It mates with any standard 0.100" pitch IDC socket or shrouded receptacle that accepts 0.025" square pins — no keying or polarization built in.