Design Note: 86837-124HLF BERGSTIK II Header
It uses the standard 0.100-inch (2.54mm) pitch on both rows and between rows, which means it drops onto a breadboard-compatible grid — no special footprint needed. Rated 5 A per circuit at 110 V, with 30.0 µin gold plating on the mating surface, this is a general-purpose board-to-board interconnect for moderate signal or low-power duty inside an enclosure.
As an unshrouded male pin header, this mates with any standard 0.100-inch (2.54mm) pitch dual-row female socket or IDC receptacle that accepts 0.025-inch square pins. For a vibration-resistant assembly, a mating connector with a strain relief or locking ramp would be needed, but that is not built into this header.