Skip to main content
Log in
Amphenol 86837-412HLF — Pin Headers, Sockets & Housings

86837-412HLF BERGSTIK II 12-Pin Dual-Row Unshrouded Header

MPN86837-412HLF
Active

Amphenol ICC (FCI) BERGSTIK® II series, 86837-412HLF, unshrouded male pin header, 12 circuits, dual-row 0.100" (2.54 mm) pitch, through-hole solder termination, tin-plated mating finish, rated 5 A per contact at 110 V.

$1.8500Ref. price · indicative, final on quote
Amphenol 86837-412HLF datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

86837-412HLF key specifications
ParameterValue
SeriesBERGSTIK® II
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board

All specifications

86837-412HLF additional specifications
ParameterValue
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions12
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.120\" (3.05mm)
Overall contact length0.600\" (15.24mm)
Contact finish - matingTin
Contact length - mating0.380\" (9.65mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

12-Position Dual-Row Pin Header — BERGSTIK II Unshrouded

The 86837-412HLF: The tin-plated mating finish (100 µinch thick) keeps contact resistance low for the first several hundred mates — appropriate for production assemblies that don't cycle repeatedly in the field.

This is the standard footprint for 0.100" dual-row receptacles — the board layout is identical to a 12-pin box header minus the shroud keep-out zone. Through-hole termination means the post protrudes 0.120" below the board — the solder fillet forms on the bottom side. No SMT reflow profile required; wave or hand solder is standard.

Frequently asked questions

Is 86837-412HLF a through-hole or surface-mount header?

Through-hole solder termination.