Skip to main content
Log in
86837-456HLF — Amphenol product photo
Amphenol

Amphenol 86837-456HLF BergStik II Header, 56 Pos

MPN86837-456HLF
Active

Amphenol BergStik® II, 86837-456HLF, Board to Board Header, 56 Positions, 0.100" (2.54mm) Pitch, 2 Rows, Through Hole, Solder Termination, Tin Mating Finish, 5A.

$4.1909Ref. price · indicative, final on quote
86837-456HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

86837-456HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions56
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.120\" (3.05mm)
Overall contact length0.600\" (15.24mm)
Contact finish - matingTin
Contact length - mating0.380\" (9.65mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

Product Introduction

The Amphenol 86837-456HLF is a 56-position, dual-row BergStik® II unshrouded header on the standard 0.100" (2.54mm) pitch. The tin-on-tin contact system is rated for 5A per circuit at 110V, with a UL94 V-0 rated black insulation housing.

The 0.100" (2.54mm) pitch and 0.100" (2.54mm) row spacing place this header on the standard grid, making it footprint-compatible with a wide range of BergStik receptacles and industry-standard 0.100" pitch ribbon cable connectors. The 5A per contact rating at 110V is typical for this class of signal/power header.

Frequently asked questions

What is the pitch of the 86837-456HLF?

The 86837-456HLF has a 0.100" (2.54mm) pitch on both the mating interface and the row spacing.

Does the 86837-456HLF require a shroud?

No, the 86837-456HLF is an unshrouded header. The mating receptacle must provide its own polarization and strain relief.

Can the 86837-456HLF be used for board-to-board stacking?

Yes, the 86837-456HLF is a board-to-board header. The 0.380" (9.65mm) mating pin length and 0.100" (2.54mm) insulation height define the stack height when mated with a compatible receptacle.