BergStik II Unshrouded Header — 8 Positions, 0.100" Pitch
Rated 5 A per contact at 110 V, with 30 µ" (0.76 µm) gold plating on the mating surface over phosphor bronze contacts, this header is built for signal-level duty and repeated mating cycles in controlled environments.
The 8 positions across two rows (4 per row) give a compact 0.400" wide footprint. The right-angle orientation means the pins emerge parallel to the board; the 0.230" (5.84 mm) post length is long enough for standard 1.6 mm PCBs with a through-hole solder fillet, but check your board thickness if you need the post to protrude for a wire-wrap or press-fit application.
No official cross-reference from TE or Molex is documented for this exact BergStik II variant, but any 8-position, 0.100" pitch, dual-row unshrouded header with the same pin length and plating will be a form-fit-function alternative — verify the post length and gold thickness against your application.