Rated 5 A per contact at 110 V, the current limit is typical for a 2.54 mm pitch unshrouded header — the housing material (UL94 V-0 rated) and contact cross-section set the ceiling, not the contact interface itself. The 52 positions are all loaded, giving the full bus width for parallel signal routing. The push-pull fastening is the standard unshrouded header latching — no locking ramp, so it relies on the mating receptacle's retention for vibration resistance.
The right-angle orientation and 0.230" post length determine the board footprint and the clearance under the connector body. The 0.190" insulation height and 0.318" mating pin length set the stack height when mated with a standard BERGSTIK receptacle — the pin must fully engage the receptacle contact beam without bottoming out.