Skip to main content
Log in
86840-420HLF — Amphenol product photo
Amphenol

FCI 86840-420HLF BERGSTIK II Header, 20 Pos, 0.100" Pitch

MPN86840-420HLF
Active

FCI BERGSTIK® II, 86840-420HLF, 20-position unshrouded header, 0.100" (2.54 mm) pitch, dual-row, right-angle through-hole, tin-plated male pins, 5 A per contact, UL94 V-0.

$2.3700Ref. price · indicative, final on quote
86840-420HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

86840-420HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.190\" (4.83mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions20
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.230\" (5.84mm)
Contact finish - matingTin
Contact length - mating0.318\" (8.08mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

BERGSTIK II Unshrouded Header, 20 Positions, Right-Angle

It uses a dual-row layout on a 0.100" (2.54 mm) pitch — the standard DIP footprint — with a matching row spacing of 0.100" (2.54 mm). All 20 positions are loaded, so there are no stuffing variants to track on the BOM.

For frequent field mating, a gold-plated variant would hold up better against contact fretting. The push-pull fastening type keeps insertion and extraction simple — no latch to actuate, but also no positive lock against vibration.

Through-hole solder termination with a post length of 0.230" (5.84 mm) and a mating pin length of 0.318" (8.08 mm).

Frequently asked questions

What is the pitch of 86840-420HLF?

The mating pitch is 0.100" (2.54 mm), with the same 0.100" (2.54 mm) row spacing, matching the standard DIP footprint.

What is the mounting type of 86840-420HLF?

Through-hole, right-angle mounting — the pins sit parallel to the PCB plane for board-edge or mezzanine connections.