Skip to main content
Log in
86840-424HLF — Amphenol product photo
Amphenol

Amphenol BERGSTIK II 86840-424HLF, 24-pos 0.100" Header, 5A

MPN86840-424HLF
Active

Amphenol ICC BERGSTIK II 86840-424HLF, 24-position dual-row 0.100" (2.54mm) male header, right-angle through-hole mount, 5A per contact at 110V, tin-plated phosphor bronze contacts, unshrouded square pins, UL94 V-0 housing.

$3.2600Ref. price · indicative, final on quote
86840-424HLF datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

86840-424HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.190\" (4.83mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions24
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.230\" (5.84mm)
Contact finish - matingTin
Contact length - mating0.318\" (8.08mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

It uses the standard 0.100" (2.54mm) pitch on both rows and between rows — the classic DIP/IDC footprint that mates with any standard 0.100" receptacle or ribbon cable connector. Tin plating keeps the cost down but limits the connector to around 25–50 mating cycles, so this header is suited for internal harness connections that are mated once during assembly or infrequently in service.

BERGSTIK II is Amphenol's general-purpose unshrouded header family. The 86840-424HLF sits at the 24-position, dual-row, right-angle variant. The same series also includes straight (vertical) versions and single-row configurations — the key selection axis is orientation and position count. If your board layout calls for a right-angle header at 0.100" pitch with 24 circuits, this is the direct fit. A straight version (vertical mount) would change the mating axis to parallel with the PCB, which changes the harness routing.

Frequently asked questions

What is the pitch of 86840-424HLF?

The 86840-424HLF uses a 0.100" (2.54mm) pitch on both the pin spacing and the row spacing — the standard footprint that matches most DIP/IDC receptacles.

Is 86840-424HLF shrouded or unshrouded?

The 86840-424HLF is unshrouded — there is no plastic wall around the pins. It mates with standard IDC receptacles but lacks keying, so the receptacle's own polarization features handle orientation.