Amphenol/FCI BergStik® II unshrouded header, 72 positions, 2 rows, 0.100" pitch, 5 A, 110 V, through-hole solder, 30 µ" gold mating finish.
| Parameter | Value |
|---|---|
| Series | BERGSTIK® II |
| Gender | Male Pin |
| Mounting type | Through Hole |
| Connector type | Header |
| Fastening type | Push-Pull |
| Voltage rating | 110V |
| Current rating | 5A |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.100\" (2.54mm) |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 72 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact length - post | 0.120\" (3.05mm) |
| Overall contact length | 0.990\" (25.15mm) |
| Contact finish - mating | Gold or Gold, GXT™ |
| Contact length - mating | 0.770\" (19.56mm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
It uses a standard 0.100" (2.54 mm) pitch on both rows and between rows, so the footprint lands on a 0.100" grid — no special pad layout needed. Rated 5 A per contact at 110 V, with 30.0 µ" (0.76 µm) gold plating on the mating surface, it handles signal-level current and repeated mating cycles in board-to-board or wire-to-board harness applications. The through-hole solder tails are 0.120" (3.05 mm) long, and the overall contact length is 0.990" (25.15 mm).
72 positions at 0.100" pitch.
The 87052-172HLF carries an Active lifecycle status per the manufacturer — full production, no end-of-life notice.
The 87052-172HLF has 72 positions, all loaded, in a dual-row configuration.