It uses the standard 0.100" (2.54mm) pitch with an identical 0.100" (2.54mm) row spacing, making it a direct footprint match for legacy 0.100" grid layouts. Rated at 5A per contact and 110V, this through-hole header carries tin-plated phosphor bronze contacts — 100.0µin (2.54µm) on the mating surface — suited for moderate-cycle, low-vibration board-to-board interconnects where cost per position matters more than gold-plating cycle life.
The 0.100" (2.54mm) pitch and row spacing define the board footprint — this header drops into a standard 2x3 through-hole pattern with 0.100" centers. The overall contact length of 0.990" (25.15mm) breaks down into a 0.770" (19.56mm) mating length and a 0.120" (3.05mm) solder post. The mating length determines the usable stack height with the matching receptacle; the short post suits standard 0.062" (1.6mm) PCBs.
The through-hole solder termination is manual or wave-solder compatible.