Amphenol BERGSTIK® II, 0.100" (2.54mm) pitch, 46 positions, 2 rows, unshrouded male pin header, through-hole solder termination, tin-plated contacts, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | BERGSTIK® II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Push-Pull |
| Voltage rating | 110V |
| Current rating | 5A |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.100\" (2.54mm) |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board |
| Parameter | Value |
|---|---|
| Package | Bag |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 46 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.120\" (3.05mm) |
| Overall contact length | 0.990\" (25.15mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.770\" (19.56mm) |
| Contact finish thickness - mating | 100.0µin (2.54µm) |
The 0.100" (2.54mm) pitch and 0.100" row spacing match the legacy 0.100-inch grid footprint common on through-hole PCBs. The 5 A per-contact rating covers signal and low-current distribution — not a bus bar replacement.
This header is a good fit for a permanent board-to-board stack where the connection is made once on the line and not field-serviced.
It has 46 positions in a 2-row layout, all positions loaded.