Skip to main content
Log in
87052-466HLF — Amphenol product photo
Amphenol

Amphenol FCI 87052-466HLF BERGSTIK II Header, 66 Pos, 5 A

MPN87052-466HLF
Active

Amphenol FCI BERGSTIK® II, Board to Board Header, 66 Positions (2×33), 0.100" (2.54mm) Pitch, 5 A, 110 V, Tin-Plated Phosphor Bronze, Through Hole, UL94 V-0.

$5.8543Ref. price · indicative, final on quote
87052-466HLF datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

87052-466HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions66
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.120\" (3.05mm)
Overall contact length0.990\" (25.15mm)
Contact finish - matingTin
Contact length - mating0.770\" (19.56mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

The Amphenol FCI 87052-466HLF is a 66-position (2×33) unshrouded male header in the BERGSTIK II series, on a standard 0.100" (2.54 mm) pitch with the same 0.100" row spacing. The 0.100" insulation height and 0.770" mating pin length give a generous entry window for the receptacle — the overall contact length of 0.990" means the solder tail protrudes 0.120" below the board. With all 66 positions loaded and tin-plated phosphor bronze contacts, this is a signal-density header for through-hole soldering into a dual-row footprint.

Plating and Duty Cycle

The tin on the solder post matches the mating finish, so the entire current path is tin-to-tin once soldered.

Compliance and Housing

RoHS compliance is typical for this series, though the specific directive status should be confirmed against the factory lot code.

Frequently asked questions

What is the mating height for 87052-466HLF?

The overall contact length is 0.990" (25.15 mm), with a mating pin length of 0.770" (19.56 mm) and a solder post of 0.120" (3.05 mm). The mated stack height depends on the receptacle's insulation height — the 0.100" header insulation height leaves the pin exposed to enter the receptacle housing.