The 0.100" (2.54mm) pitch on both rows and the row spacing matches the standard footprint for legacy through-hole designs — the same pitch used across the BERGSTIK II family. All 68 positions are loaded with square male pins in phosphor bronze, finished with 100.0µin (2.54µm) tin on the mating side and tin on the solder posts.
Rated 5A per contact at 110V, this header handles signal-level current across the full 68-pin array — the tin plating on the mating interface is suited for moderate mating cycle counts in controlled environments. The through-hole solder termination with a 0.120" (3.05mm) post length provides a stable mechanical anchor on the board. Overall contact length is 0.990" (25.15mm), with a 0.770" (19.56mm) mating section and 0.100" (2.54mm) insulation height above the board.