Skip to main content
Log in
87185-102HLF — Amphenol product photo
Amphenol

87185-102HLF BERGSTIK® II 2-Pin Header, 0.100" Pitch

MPN87185-102HLF
Active

Amphenol ICC (FCI) BERGSTIK® II 87185-102HLF, 2-position single-row unshrouded board-to-board header, 0.100" (2.54mm) pitch, through-hole solder termination, male square pins with 30.0µin gold or Gold GXT™ mating finish, rated 5A per contact at 110V, UL94 V-0 black insulation, push-pull fastening, active.

$0.5200Ref. price · indicative, final on quote
87185-102HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

87185-102HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions2
Contact length - post0.095\" (2.41mm)
Overall contact length1.238\" (31.45mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating1.043\" (26.49mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

Two-Pin Jumper Header for Board-to-Board Spacers

The 87185-102HLF: Pitch is 0.100" (2.54mm), the industry-standard spacing that mates with matching 0.100" receptacles and IDC sockets. Overall contact length is 1.238" (31.45mm), so the mated stack height sits well above the board surface for clearance under a connector shroud or a mezzanine board.

Compare this to a tin-plated sibling in the same BERGSTIK® II family: tin is fine for a one-time solder joint but wears through faster under repeated mating. The gold premium here buys you a connector that stays within its 5 A rating across the full service life, not just at first mate.

No stock-holding claim — we source through independent distribution to match your delivery window.

Frequently asked questions

What is the closest pin-compatible alternative to 87185-102HLF?

Confirm the mating half and board hole pattern before substituting.