The Amphenol ICC BERGSTIK II 87185-110HLF is a 10-position, single-row, unshrouded male header on the standard 0.100" (2.54 mm) pitch. The black UL94 V-0 polyester housing carries square pins made from phosphor bronze, with the mating surface plated in 30.0 µ" (0.76 µm) gold or Gold, GXT™. This is a basic building-block header used for signal and low-power distribution on PCBs, prototyping boards, and test fixtures.
The 0.100" (2.54 mm) pitch is the de facto standard for breadboards, perfboards, and 0.1" grid prototyping — this header drops straight into a solderless breadboard or a standard grid PCB footprint without layout adjustments. Rated 5 A per circuit, this header handles signal-level currents and moderate power distribution. The 110 V voltage rating and UL94 V-0 flammability rating mean it is approved for use inside equipment enclosures where flame retardance is required. The unshrouded design gives you access to the pins for probing, jumpers, or stacking additional headers — but leaves the pins exposed, so it is best suited for internal connections where accidental shorting is not a risk.