The FCI BERGSTIK® II 87185-111HLF is an 11-position, single-row, unshrouded male header on the standard 0.100" (2.54 mm) pitch.
The 0.100" pitch matches standard perfboard and breadboard spacing, so the footprint is straightforward — 11 through-hole pads on 0.100" centers, one row. The overall contact length of 1.238" (31.45 mm) breaks down into a 1.043" mating length and a 0.095" solder post, giving a low board standoff. The 0.100" insulation height means the plastic body sits close to the PCB surface, which helps when routing signals under the header in a tight z-height budget.
This is an unshrouded push-pull header — no locking ramp or latch, so retention depends on the contact friction from the mating receptacle. The through-hole solder termination is manual or wave-solder friendly.