Board-to-Board Header, 35 Positions, Single Row
The header is through-hole mounted, with male square pins terminated via solder. Rated at 5A per contact and 110V, this is a signal-level interconnect — the 30µ" (0.76µm) gold plating on the mating interface gives it the cycle life for repeated mating in test equipment or field-serviceable boards, not the thin flash you'd see on a disposable consumer connector.
Fit and Footprint Considerations
The 0.100" pitch and single-row layout mean the board footprint is a straight line of 35 plated through holes on 2.54mm centers. The overall contact length is 1.238" (31.45mm), with 1.043" (26.49mm) of that above the board for the mating interface and 0.095" (2.41mm) as the solder post below. The black housing contrasts well against the gold pins for visual inspection after soldering.
This is a standard catalog part in the BERGSTIK II family, so lead times are typical for a through-hole header in this position count.